Adapter K-Line-USB in GM-12 case

Product picture

Product description format_size zoom_out zoom_in

The adapter is made using specialized microcircuits (FTDI and MC33390) providing high reliability and guaranteed communication with the vehicle ECU.
The adapter allows diagnostics, reading/erasing error codes, chip tuning of domestic or foreign cars using the ISO 9141 standard of the VAZ family: 2108,2109,21099,2110,2111,2170, Lada Kalina, Daewoo: Lanos, Sens, Daewoo, Nubira, Espero, AvtoZaz family: Tavria, Slavuta, including Mikas 10.3

¦ ¦ Here you can download a selection of programs (software) for the K-L line adapter

Specifications
1. Direct connection to PC USB port using a standard USB extension cable. Provides maximum exchange rate and protection against interference.
2. Ability to use the same Adapter for Diagnostics and Chip Tuning;
3.USB K-Line adapter is built on FTDI microcircuit, which allows setting wide parameters of RS232 converter.
4. Protection against polarity reversal, overheating, short-term short circuit of the K line to ground and+12V
5 Direct connection to the diagnostic socket of the car
6. Supports protocols ISO 9141-2 and ISO 14230-4 (KWP2000).


You will be able to produce:
reading fault codes,
reading data streams,
active tests of executive units,
adjustment of constants (UOZ, CO, etc.),
adaptation of the immobilizer, recording (if there are access codes).

Attention. The ability to carry out the above functions directly depends on the diagnostic software used and the capabilities of the electronic engine control unit.

Also, the adapter is compatible with diagnostic software, the instructions for which indicate the use of the K-Line adapter.

---

Connection is carried out according to option 1.

Before purchasing, check if the pinout in your car matches the adapter you are purchasing.
Note: if necessary, you can change the connection yourself by soldering the connector pins.