The multimeter can measure the following parameters:
- direct and alternating current (up to 10 A)
- DC and AC voltage
- resistance
- capacitance of capacitors
- frequency
- measurement of duty cycle
Also available:
-
audible chain ringing,
-
pn junction testing (diode test),
-
testing transistors.
-
relative measurement mode REL
-
4-20mA current loop
-
Fuse in 10 A circuit
-
Simultaneous current and voltage measurements
-
Peak value indication
-
Maximum/minimum mode
Convenience in work will be ensured by the following functions:
-
auto range detection
-
Current measurement mode warning
-
presets
-
true rms reading
-
screen backlight
-
full screen mode
-
analog strip on the display
-
automatic power off in the absence of measurements ("sleep mode");
-
DATA HOLD mode;
-
optically isolated RS232C interface for communication with a computer;
-
overload indication;
-
low battery indication (7.5 V);.
-
a cover made of elastic plastic around the perimeter of the device protects it from mechanical damage.
Display: LCD, size 73 x 50 mm. maximum bit depth - 20,000;
Direct voltage (DC), V : 200mV/2V/20V/200V/1000V: ±(0.2%+8)
Input impedance of DC voltmeter at 200 mV limit : 2.5 GΩ;
Input impedance at other limits: 10 MΩ
Alternating voltage (AC), V: 4 V/40 V/400 V/1000 V: ±(0.8%+40)
Measured AC voltage frequency : 100 kHz.
Direct current (DC), А: 200μA/2000μA/20mA/200mA/10A: ±(0.2% +20)
Alternating current (AC), A: 200μA/2000μA/20mA/200mA/10A: ±(1% +15)
Resistance, Ohm: 200 Ohm/2 kOhm/20 kOhm/200 kOhm/2MOhm: 20 MOhm: ±(0.5%+20)
Capacitance, F: 20 nF/200 nF/2 μF/20 μF/200 μF/2 μF/20 μF: ±(1.5%+20)
Frequency, Hz : 20 Hz/200 Hz/2 kHz/20 kHz/200 kHz/2 MHz/20 MHz/200 MHz ±(0.1%+15)
Relative duty cycle: 10% - 90.0%
Sampling rate: 2-3 times/second
Power supply: 9V battery "Krona"
Dimensions: 200 x 93 x 40 mm.
Weight: 384 grams.
Accessories included: Test leads, battery, manual, crocodile clips, test clips, power supply, USB cable, software, carrying bag.