Soldering station "three in one":
a non-compressor hair dryer with a nozzle for installation of crimping nozzles, the most common and available.
a soldering iron with a ceramic heater HAKKO.
15 Volt, 3 Amp, full-featured laboratory power supply.
All three units can be operated simultaneously or separately, each operated by its own key switch (there is also a master power switch on the rear panel). This arrangement significantly saves desktop space.
Temperature control using the PID controller algorithm, implemented on a dedicated SAMSUNG microcontroller. Switching of heating elements - triacs, with zero crossing control. Rugged metal body of the control unit.
- 650 W hot air gun with built-in fan, maximum air supply capacity - 120 liters per minute, temperature from 100 C oto 450 C o The set includes 4 nozzles of various diameters with a screw crimp.
- electronic temperature control guarantees good thermal stability of the air flow even with a sharp change in the volume of supplied air.
- function of automatic cooling of the hot air gun after installation in the holder protects the heating element from overheating.
- soldering iron 24V, power 60-75 W; the used ceramic heating element HAKKO 1321 ensures reliable operation, durability and temperature stability.
- resistance-type soldering iron temperature sensor (built into the heater), which provides low inertia and greater accuracy of temperature maintenance compared to a thermocouple;
- antistatic design, galvanic isolation, 24V supply voltage ensure the safety of electronic components and the board.
- in the basic configuration, the tip is a cone with a 0.8 mm end, durable, chrome-plated; design compatibility of soldering iron tips with HAKKO and XYTRONIC soldering systems provides a large selection of tips.
-the supplied stand with a cellulose sponge for wet cleaning the tip reliably protects the soldering iron from mechanical damage when dropped, as well as from accidental touching heated parts .
Built-in power supply with adjustable output voltage up to 15V, current up to 3A). Digital voltage indication. Pointer ammeter (more clearly monitor the dynamics of current consumption by the connected device. Current stabilization mode, automatic protection against overload and short circuit.
The power supply voltage indicator can be switched to the external voltage measurement mode (maximum DC 100 V). For connections use the same 4 mm banana connectors as for connecting the power supply load.
In terms of its technical characteristics and price level, the station is most suited to the tasks of repairing, first of all, portable electronics (mobile phones, video cameras, etc.), household appliances, for prototyping and development.
Warranty obligations for all YIHUA soldering station and board heater models are 3 months.
Heating elements and soldering tips are not covered by the warranty.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
