ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!
CUSTOMER LOGIN

Forgot your password?
Register
Search:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Tools and equipmentPower toolsMicro drills, engraving machines
Product code:
027333

Micro drill 12-24V, 40W, 12 thousand rpm without power supply

Miniature chuck drill for drills with 0.3-4mm shank. Power supply 12-24 V, power 40 W. Up to 12 thousand rpm.
 Micro drill 12-24V, 40W, 12 thousand rpm without power supply
NOT available.
Expected price: 772,80 UAH
from 1 pc : 772,80 UAH
from 3 pcs : 757,30 UAH ( -2,0%)
from 5 pcs : 741,90 UAH ( -4,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Product picture

Product description format_size zoom_out zoom_in

Miniature drill with a jaw chuck for drilling printed circuit boards, working with abrasive and polishing attachments.
Aluminum cylindrical case, well removes heat from the electric motor.
In the rear end of the case there is a power connector and a power switch.





.
When working with a micro drill, long periods of maximum load should be avoided to allow the tool to cool down. It is easy to control the temperature of the case "by hand"; the drill is held by hand during operation. When mounted in a tripod, the temperature must be checked periodically.

Features:
  • The rotation speed is regulated by voltage: maximum 12000 rpm.
  • power supply: 12-24 VDC (DC)
  • connection socket: 5,5/2,1 mm cylindrical
  • power: 40 W
  • overheating protection: no
  • anti-jamming: no
  • body length: 95 mm (without chuck)
  • body diameter: 40 mm (for mounting in a tripod)
  • chuck: cam
  • drill diameter: 0.3 - 4 mm
Completeness:
  • drill - 1 pc
  • key for chuck - 1 pc
  • drills - 3 pcs
Warranty: this micro drill is not guaranteed due to technical features - the lack of an original power supply in the complete set and lack of protection against overheating. Accordingly, an erroneously exceeded supply voltage level will disable the instrument.
All micro drills are 100% pre-tested.

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

  • fantom327 22:28 01.07.2017 shopping_cartalready bought share

    Не понравился.

    Сильно шумит и гремит, наверное плохой подшипник.

    Из-за магнита внутри к корпусу постоянно липнет металлическая пыль.

    Штекер питания постоянно отходит из разъема.

     

    Is the review helpful?
    • RS (Менеджер интернет-магазина) 09:13 03.07.2017 share

      Если причина шума в подшипнике - то кроме шума будет еще и повышенное биение. При предпродажной проверке мы проверяем биение.

      Магнит внутри корпуса - так это конструктив двигателя такой, с постоянными магнитами.

      Штекер питания  плохо фиксируется - может причина как раз штекере? Ведь эта дрель источником питания не комплектуется, соответственно,. штекером питания тоже. Попробуйте другой штекер.

       

      P.S.  кто-нибудь сможет порекомендовать мне абсолютно бесшумную дрель? 

      Is the review helpful?
      • Дядя Вася 10:20 06.03.2018 share

        могу, моторчик ДП-1 )))

        Is the review helpful?
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: View more…

Последние просмотренные товары Посмотреть Последние...