Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
High-voltage bus insulators SM are used for fixing current-carrying buses inside power cabinets and assemblies in order to fix and isolate live parts from the case and assembly panels, with the subsequent connection of power conductors to distribute electricity inside the switchboard.
The insulator is fixed on one side with a bolt to the mounting plate or housing, on the other side the bus bar is attached to the insulator. Each bus is installed on at least two insulators (at the ends of the bus), and it is also possible to install intermediate insulators (depending on the installation scheme and the length of the bus).
Insulator type
Overall dimensions, mm
A
B
C
D
F
G
High-voltage insulator SM25 X M6
25
9
9
23
29
M6
High-voltage insulator SM30 X M6
30
10
10
26
32
M6
High-voltage insulator SM30 X M8
30
10
10
26
32
М8
High-voltage insulator SM35 X M8
35
10
12
28
33
М8
Specifications:
Rated operating voltage up to - 1000 V
Breakdown voltage - 10 kV
Body material - fiberglass-reinforced dielectric plastic
Material density - 1.75 - 1.95 g/cm
Impact strength, not less - 25 kJ/m2
Operating temperature range-40°С -+60°С
Height above sea level up to - 2000 m
Average value of relative humidity at t = 15°С - 75%
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Евгений ЗП
unknown