ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

Шановні клієнти інтернет-магазину!

  У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком:
• з 31.12.24(Вт) по 02.01.25(Чт) не працюємо
• з 03.01.25(Пт) працюємо в звичайному режимі.

  Інтерет-магазин приймає замовлення цілодобово 24/7 !



Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Tools and equipmentWorkplace equipmentOpticsDesktop magnifiers with illumination
Код товара:
000102

Table magnifier with illumination LUP-8064-3 [9001-7] 3 diopters

127mm diameter lens with 22W luminescent ring light on pantograph. Fastening with a clamp to the edge of the table. Magnification 175% at a distance of 20 cm.
Table magnifier with illumination LUP-8064-3 [9001-7] 3 diopters

Deliveries terminated.



Изображение товара

Product description format_size zoom_out zoom_in

Pantograph with an open balance bar mechanism, i.e. the springs are located outside, on the levers of the pantograph.
This design is not only simple and reliable, but also a kind of technical design element.
The levers of the pantograph are metal, painted with a powder paint resistant to damage.

Plastic lens housing with ring light.
The magnifier is closed by a hinged protective cover.
An increase of 3 diopters (magnification factor x 1.75) is optimal for comfortable work with a hand tool (soldering iron, tweezers, screwdriver, etc.). With this magnification, a focal length of about 250 mm allows you to work freely under the lens without touching it.

Backlight lamp - fluorescent, with electronic ballast (located inside the lens housing). The luminous flux of the lamp is equivalent to that of a 100 watt incandescent lamp.
Lamp switch on the upper plane of the lens housing.
A transparent plastic diffuser protects the lamp from accidental mechanical damage during operation and transportation.

Clamp bracket for fixing the lamp to the edge of the table.
The maximum thickness of the worktop on which the clamp can be installed is 60 mm.

Specifications:
  • Model: 9501-7
  • lens diameter: Ø5 "(Ø127 mm)
  • lens power: 3 diopters
  • supply voltage: 100-240 V, 50 Hz
  • power consumption: 22 W
  • lamp type: fluorescent, FCL22W G10q
  • lamp color temperature: 6200-6600K
  • lens material: glass
  • thickness of the worktop for fastening the clamp (max): 60 mm
  • case and mechanism material: ABS-plastic, polycarbonate, steel
  • White color
Attention!
Always close the lens cover after use!
The cover not only protects the lens directly from dust and damage.
The main purpose of the cover is to prevent fire.
After all, when you use a magnifying glass, you usually place it at the height of the focal length from the table surface. If the table is near the window, then the sun's rays focused by the lens can set fire to objects on the table (paper can easily catch fire even from a magnifying glass of much smaller diameter).
Take this caveat seriously, precedents have already happened with our clients!

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: Посмотреть больше…