Natural elasticity and thermal conductivity, combined with low thickness and high strength, ensure minimal thermal resistance with reliable electrical insulation
Installation of electronic heat-generating components is carried out without the application of heat-conducting pastes, which guarantees reliability and electrical safety, and also reduces assembly time
Thanks to the fiberglass reinforcement, the materials are resistant to mechanical damage in case of strong compression between the flat pressure surfaces of the housing and the radiator - a pressure of up to 40 MPa does not damage the material. At the same time, the elastic silicone base with high thermal conductivity fills the unevenness of the microrelief of the compressive surfaces, increasing heat transfer.
The materials are non-toxic, do not emit harmful substances during installation and operation, and are not affected by substances used when cleaning printed circuit boards.
Specifications:
-
Thermal resistance: 0.4°C/W
-
Electrical insulation: 10 kV/mm
-
Insulation resistance: 2.9 x 1015 ohm/cm
-
Working temperature: from - 60°С to+180°С
-
Thickness: 0.3mm
-
Size: 19 x 13mm
Attention!maximum thermal conductivity is achieved in a few hours after installation, during which time the microroughnesses of the surfaces are gradually filled with the substrate material.
Открыть файл с описанием
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
