Можливі тимчасові затримки відвантаження товарів транспортними компаніями. Термін відправки після отримання оплати до 4 робочих днів. Вибачте за незручності.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Digital current clamp for non-contact measurement of alternating current (AC) up to 1000 Amperes. Multimeter functions. Manual selection of measurement limits.
This model of current clamp allows you to measure the value of the alternating current (AC) by a non-contact method, and also measure direct and alternating voltage, alternating current, resistance, allow you to ring a circuit for an open circuit in the multimeter mode, using test leads.
The "Data Hold" function (holding of measurements) makes it possible to carry out current measurements by a non-contact method in hard-to-reach places where it is difficult to visually check the display readings.
Measuring functions:
- alternating current
- constant and alternating voltage
- continuity of the circuit (with a sound signal)
- "Data Hold" function
indication of an incorrectly selected measuring range
low battery indication
SPECIFICATIONS:
display: LCD 3 1/2 digit (1999)
sampling rate: 3 times/s
constant voltage (DC): 200mV/20V/200V/1000V, error ±(0.5%+1)
alternating voltage (AC): 200V/600V, error ±(1%+4)
alternating current (AC): 20A/200A/1000A, error ±(2.5%+5)
resistance: 200Ω/20kΩ/2MΩ, error ±(1%+1)
continuity of the circuit: sound signal at resistance <50 Ohm
maximum diameter of the measured wire: 28 mm
power supply: 1pc battery 9V 6F22 "Krona"
dimensions: 230 x 90 x 43 mm
weight: 320 grams
Accessories included:
set of measuring probes
soft case
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
