Digital DC voltmeter CH-c3200 is designed to indicate and control DC voltage in the range (recommended) from 0.01 to 99.9 volts. It allows you to work in three modes: indicator, control of voltage output beyond the permissible range, control of voltage presence in the specified range. The voltmeter allows you to enter a delay for turning on the auto-control function from the moment the supply voltage is applied.
The voltmeter has a calibration function that allows, when using an input divider, to change the measurement range, as well as, if necessary, turn off the decimal point indication (for indication in the range of 0 - 999).
A voltmeter can be used to indicate alternating voltage; for this, a rectifier is connected to the input and calibrated against a reference device. The displays can be expanded to 999 volts (decimal point is disabled, external divider is set and calibrated).
The voltmeter is manufactured in a packageless version. To power the controller, an alternating voltage from 8 to 12 (16) volts or a constant voltage of 12 (24) volts can be used.
The load current of the output switch should not exceed 100 mA.
-s.jpg)
Иструкция по эксплуатации
Простой цифровой вольтметр ch-c3200
.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
