OBD-2 scanner ELM327 communicates with any car that supports OBD II specifications, regardless of the communication protocol and car brand. As a rule, these are all American cars produced since 1996 and European ones since 2001, diesel since 2004.
The adapter is compatible with many diagnostic programs.
The Bluetooth interface is not only convenient due to the lack of a cable, but also allows you to use the scanner on PDAs, tablets and mobile phones, including those running Android.
Due to its small size, the compact adapter can stay in the OBD-II socket of your car all the time, without interfering with driving (even if the connector is located above the brake pedal) and practically not consuming battery power, since it is equipped with a shutdown button.
ELM327 features:
-Error reading and decoding (DTC memory)
-Erase errors (turn off the MIL - Check Engine)
-Read parameters in real time:
-Engine RPM
-Engine load
-Coolant temperature
-Fuel system status
-Vehicle speed
-Short Term Fuel Consumption
-Long term fuel consumption
-Absolute air pressure
-Ignition advance
-Temperature of the intake air
-Mass air flow
-Throttle position
-Lambda probe
-Fuel pressure
- And more - depends on the specific car ...
-Diagnose ABS (brakes) and automatic transmission (gearbox) - not on all models
-Plotting charts
-Read the VIN of the body number
- Acceleration time to 100 km/h
.... And more depends on the specific program.
EOBD specs include automatic transmission and ABS, but they are optional - so car manufacturers support them as they see fit.
Description:
-
16 pin OBDII connector, inside the connector housing is an adapter board.
-
LED indicator of modes: Power
-
Operating voltage: 12V (from the vehicle's on-board network)
Delivery set:
-
Adapter ELM327 in a plastic case
-
CD with drivers
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
