ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

УВАГА! Шановні клієнти магазину в м.Дніпро!

З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.




Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Measuring instrumentsLaboratory power suppliesLaboratory power supplies
Код товара:
019647

Laboratory power supply 15V 2A art. PS-1502DD +

Laboratory power supply unit with digital LED indication (voltmeter and ammeter), 15 Volts, 2 Amperes, automatic short circuit protection. Hobby class.
Laboratory power supply  15V 2A art. PS-1502DD +
Expected price: 920,00 UAH
from 1 pc : 920,00 UAH
from 2 pcs : 901,60 UAH ( -2,0%)
from 5 pcs : 883,20 UAH ( -4,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

Compact single-channel stabilized power supply with adjustable output voltage from 0 to 15 V and output current from 0 to 2 A. It is characterized by good voltage stabilization.
Recommended for service and laboratory work.

Functions:
  • red LED indication of current and voltage
  • stepless voltage regulation, two potentiometers - for coarse and fine adjustment
  • fixed output voltage values: 1.5V, 3.6V, 4.8V, 6.0V, 7.2V
  • short-circuit protection short circuits
  • current limiter (from 0.6A and above)
  • simultaneous display of voltage and current
  • high voltage stabilization factor
  • automatic protection against short circuit and overload
  • indicator of the power of radio waves of the GSM-band

There is no current stabilization mode, only the load is disconnected when the set level is exceeded. Automatic "trigger" protection, when the load is removed, the voltage is restored at the output terminals of the power supply.
It is not recommended to use for galvanization, because during long hours of switching on at minimum low voltage and maximum current, the power supply unit overheats.

Characteristics:

  • output voltage 0 - 15 V
  • load current, maximum: 2 A
  • load current, nominal: 1 A
  • voltage ripple level: <1 mV
  • load influence factor,%: <0.33
  • supply voltage: 220 V ±10% 50Hz
  • operating conditions: 0 ~+40 C, relative humidity <80%
  • dimensions: 210 x 170 x 170 mm
  • weight: 1.06 kg

 
Parameters
 
Rated voltage 
 
AC220V±10%  50Hz
 
Operating environment 
 
0~40℃  relative humidity<80%
 
Storage temperature 
 
-20~80℃  relative humidity<80%
 
Dimensions of the machine body
 
17*33*21CM
 
Weight 
 
1.06KG
 
Performance parameters 
 
Output voltage 
 
Adjustable continuously within 0~15V
 
Output current 
 
Adjustable continuously within 0~1A 
 
 
(current limitation adjustment when above 0.2A)
 
Output power 
 
15W
 
Source effect
 
≤1mV
 
Load effect
 
≤0.33%
 
Ripple noise
 
≤3mVrms(5Hz ~ 1MHz)/≤3mArms
 
Display accuracy 
 
0.1V/0.1A/1mA
 
Protection mode
 
Over-current, short circuit, over-temperature protection 
 
Dissipation mode
 
Air cooling 
 

Предлагаемые замены

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: Посмотреть больше…