У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Digital controlled professional hot air soldering station. LED display. Compressor hair dryer for crimping nozzles. Locking settings. High performance compressor with receiver.
Professional soldering station with a hair dryer of increased productivity and a soldering iron.
The main feature of this station - the air source for the hair dryer is a compressor of increased power with a receiver. The receiver smoothes the air surges inherent in the diaphragm compressor, ensuring uniform air flow.
The advantage of soldering stations with compressors over turbo hair dryers (when a snail fan is installed inside the handle of the hair dryer) is the ability to develop a higher air flow pressure. Increased pressure is necessary to work with large nozzles of complex shape, in which case the air flow will be evenly distributed around the entire perimeter of the nozzle.
Temperature control according to the PID controller algorithm, implemented on a specialized SAMSUNG microcontroller. Switching of heating elements - triacs, with zero crossing control.
Metal case of the control unit, mechanical power switch (key) on the rear panel.
Hair dryer nozzle for crimp-type nozzles.
Large seven-segment indicators of temperature and airflow level are clearly visible from any angle of view.
The station is equipped with a security key to block changes settings. The settings can only be changed when the key is inserted.
Functions:
Crimp tip nozzle.
liquid crystal display with digital indication of hot air gun and soldering iron temperature, graphic indicator of air flow power.
The electronic temperature control of the hair dryer ensures good thermal stability even with a sharp change in the volume of supplied air.
650 W hot air gun, temperature from 100°C to 480°C. The set includes 4 cylindrical nozzles of various diameters of the crimp type.
the function of automatic cooling of the hot air gun after installing the hot air gun in the holder protects the heating element from overheating (the power to the heater is turned off, while the compressor continues to blow the hot air gun, cooling it down to a temperature of 100°C
soldering iron 24 V, power 75 W; temperature range 200°C to 480°C.
antistatic, galvanically isolated, 24 V supply voltage ensure the safety of electronic components and boards .
The applied ceramic PTC heating element HAKKO 1321 ensures reliable operation, durability and temperature stability.
The temperature sensor of the resistive soldering iron (built into the heater), which provides good heating dynamics and greater accuracy of maintaining temperature compared to a thermocouple, especially when working with multilayer PCBs.
a motion sensor built into the handle of the soldering iron (miniature ball switch) is used to start the soldering iron into standby mode in the absence of activity.
temperature correction of the soldering iron and hair dryer.
as standard sting - a cone with an end face of 0.8 mm, durable, chrome-plated; The design compatibility of the soldering tips with the HAKKO and XYTRONIC soldering systems provides a large selection of tips (these tips are used in the LUKEY station and similar clones).
The supplied stand with a cellulose sponge for wet tip cleaning reliably protects the soldering iron from mechanical damage when dropped, as well as from accidental contact with heated parts.
Overall dimensions:
width: 253 mm
height: 124 mm
depth: 186 mm
ATTENTION!
Before starting operation, unscrew the compressor transport screws (located on the base of the station on the bottom side).
Working with the transport screw that has not been removed is subject to strong vibration and leads to mechanical damage to the soldering station!
Warranty: 3 months for all YIHUA soldering stations and heaters.
Warranty does not cover: heating elements and soldering tips, which are consumables.
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
