Designed to remove smoke and harmful vapors from the work area during the soldering process.
Fixed on the desktop with a bracket.
Mobility along three axes of coordinates allows you to install the smoke extractor in a convenient position for you, directly above the working area.
An absorbent filter element - foam rubber with activated carbon is installed in front of the fan blades.
The smoke extractor is completed with an adapter, to which you can connect
exhaust hose with a diameter of 100 mm and use the smoke extractor as an exhaust.
If there is nowhere to connect the exhaust hose, then instead of the adapter for the corrugation, it is necessary to install a nozzle on the back side of the fan, which deflects the air flow upward (i.e. away from the radio installer).
Specifications:
-
supply voltage: 220 V
-
power: 23 W
-
capacity: 60 cubic meters/hour
Completeness :
-
smoke extractor: 1 piece
-
pantograph with clamp: 1 piece
-
corrugation adapter: 1 pc
-
deflection nozzle: 1 piece
-
replaceable filter: 2 pieces
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
