For the repair of modern designs of electronic equipment, primarily portable mobile devices, special equipment is required, without which some repair operations simply cannot be performed at the proper level.
Such operations include disassembling the display module (peeling off the glass), replacing microcircuits in BGA packages, working with components in ceramic packages and printed circuit boards based on ceramics (ceramics are critical to the heating rate and high temperature gradient of the working tool).
Using the most popular methods of dismantling components using a heated air stream (i.e. a hair dryer) without bottom heating of the board increases the risk of local warpage of the board due to one-sided heating.
The use of preheating boards makes it possible to reduce the operating temperature of the thermal tool, reducing the risk of damage to components from thermal shock.
New models of board preheaters allow you to cover a wide range of repair work. This is due to the design of the heating plate - a polished aluminum surface with spring-loaded lever clamps installed along the edges. Smooth aluminum warms up the display module evenly, pressed against the clamps.
Digital temperature control in a wide range from+50°C to 350°C with a stabilization accuracy of 1.5°C guarantees compliance with the technological process of almost all repair work.
The use of YIHUA aluminum platform heaters is recommended by such manufacturers as SAMSUNG, LENOVO, and others.
SPECIFICATIONS
-
Supply voltage: 220V, 50Hz
-
Maximum power: 800W
-
Platform temperature adjustment range^from+50°С to+350°С
-
Temperature maintenance accuracy: +/- 1.5°С
-
Overall dimensions: 218 x 218 x 130 mm
All YIHUA board heaters have a 3 month warranty.
The warranty does not cover heating elements that are consumables.
_250x281.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
