Engraving machine attachments and flexible shaft are actually a complete engraving set, but without the machine itself.
The suitcase has free space for a typewriter. Four interchangeable collets for installing bits with a shaft diameter of 1.0 mm to 3.2 mm make it possible to widely diversify the assortment of drills and bits used. For easy transportation and storage, the accessories are packed in a plastic case with a transparent lid. The attachments - and there are about 300 of them in the suitcase, see the attached photos - are installed on rotary shelves-holders.
With the lid of the suitcase open, you need to turn the shelves and access to all accessories will open (the manufacturer may slightly change the set of attachments in different batches of sets).
Attention!
The flexible shaft must be lubricated before use. To do this, remove the wire core from the braid and cover it with a grease (any, for example, Litol-24 or CIATIM).
During operation, the shaft must also be periodically lubricated.
A good result (reduction of friction power losses, increase in the resource of the flexible shaft) is obtained by a grease with the addition of molybdenum disulfite.
Equipment:
-
plastic case for transportation and storage, complete with attachments - 1 piece
-
flexible shaft - 1 piece