Зображення товару

Product description format_size zoom_out zoom_in

A miniature electromechanical thermostat is designed to close the power electrical circuit at a given temperature. As soon as the temperature drops below the set point, the power circuit is opened again. This switching mode is suitable for use in conjunction with fans, refrigeration units, and also as a temperature sensor.
The thermostat is based on switching contacts using a thermosensitive element - a bimetallic plate. Thus, it does not have its own power consumption.
The thermostat is small, lightweight and easy to install and connect. The temperature sensor is located inside the thermostat housing, therefore it is necessary to place it directly in the controlled temperature zone.

Main characteristics:

• Temperature range: 0 to +60°C
• Difference between temp. incl. and off: 7 K (±4 tolerance)
• Sensing element: thermobimetal
• Contact type: snap contact
• Service life:> 100,000 cycles (max.)
• Switching. capacity (resistive load): AC 250 V, 10 A/AC 120, 15 A/DC 30 W
• Switching. capacity (inductive load): AC 250V, 2A/AC 120V, 2A
• Connection: 2-pole clamp
• Connection wire (max.): Rigid wire 2.5 mm², stranded wire with cable clamp 1.5 mm²
• Mounting: clip for 35mm DIN rail (or for EF 118 series outlet filter)
• Housing: plastic, UL94 V-0, light gray
• Dimensions: 60 x 33 x 43 mm
• Weight: approx. 40 g
• Mounting position: any
• Operating/storage temperature: -45 to +80°C
• Protection degree: IP20

Dimensions:

Connection diagram:

Connection example: