High temperature two-component adhesive putty filled with metal powder, ceramics, quartz fibers. Possesses high impact strength and hardness after curing.
Recommended for sealing cracks in cylinder blocks of internal combustion engines, filling casting defects (porosity, cavities).
Sealing cracks in aluminum radiators, fuel tanks, various containers for fuel, oil, water, antifreeze.
Specifications:
-
appearance of component A: viscous mass, silvery
-
appearance of component B: viscous mass, yellow-brown
-
hardness: Shore-D ≥ 80 at 25°C
-
shear strength at room temperature: ≥ 15MPa after curing at 25°C for 24 hours
-
maximum operating temperature: 150-200°C
-
ratio of components: A: B = 2: 1 (mass ratio)
-
setting time: 45 minutes
-
functional curing time: 24 hours at 25°C (70-80% strength)
-
curing time: heating up to 80°C after curing at room temperature for 24 hours, or holding for 7 days at a temperature of 25°C
-
packing: plastic jars
-
weight of component A: 100 grams
-
component B weight: 50 grams
Recommended use:
Prepare bonding surfaces: wash off dirt, oil residues, degrease well. Sandpaper or any other abrasive.
Mix the components of the adhesive in the ratio A: B = 2: 1 (mass ratio).
Apply glue to the surfaces to be bonded, squeeze and leave for 24 hours. If necessary, the joint can be additionally reinforced with metal mesh or fiberglass.