Specifications:
scope mode:
Maximum sampling rate: 200MSa/S *
Bandwidth: 20 MHz (up to 33 MHz) **
Vertical resolution: 8 bit
Input range: 10 mV - 5V; 100mv -50V (X10 probe), (1,2,5 stops)
Vertical accuracy: +/- 3%
Resistance: 1 Mohm, 25pF
Connection: DC, AC
Display mode: Y-T, XY (JDS2022A)
Input voltage: up to 40V (X10 probe); up to 400V (X10 probe); with X100 probe, can measure voltage 2000V
Sweep: 10ns - 50ms (step 1, 2, 5), 100ms -5s (in scan mode, i.e. no synchronization)
Memory depth: 2K
Trigger trigger modes: automatic, normal, single
Trigger conditions: leading edge, trailing edge
Automatic tuning: in the frequency range 50 Hz - 40 MHz
Measurements: peak-to-peak (Vp-p), frequency, cursor time and voltage measurements
Math Functions (JDS2022A): Signal Addition, Signal Subtraction
Recording/storage: 2 waveform samples, 6 BMP screenshots
multimeter mode:
DC voltage: 400 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
AC voltage: 400mV, 4.000V, 40.00V, 400.0V, 750V
Resistance measurement: 400.0Ω, 4.000KΩ, 40.00kΩ, 400.0kΩ, 4.000mΩ, 40.00mΩ
Capacitance measurement: 51.20nF, 512.0nF, 5.120uF, 51.20uF, 100uF (30sec)
Continuity: beep less than 60Ω
Diode test: 0 - 1.5V
-
display: 3.2 ", 16 - bit color, TFT 320 * 240
-
battery: Li-ion 18650
-
current consumption: 0.26 - 0.34 A in oscilloscope mode, 0.17 - 0.2 A in multimeter mode
-
overall dimensions: 202 * 100 * 35 mm
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
