Можливі тимчасові затримки відвантаження товарів транспортними компаніями. Термін відправки після отримання оплати до 4 робочих днів. Вибачте за незручності.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
This is one of the best professional programmers of microcircuits (memory chips). The device and the program currently support more 13143 microcircuits ! Nevertheless, the program is constantly updated by the manufacturer and new ones are added.
All elements of the programmer are of high quality - the microcontroller is high-performance, while it has a low level of power consumption, which made it possible to refuse an external power source.
Designed for programming microcontrollers and repairing laptops, computer equipment, household equipment, auto chip-tuning, odometer adjustments. It is also suitable for radio amateurs who want to have at their disposal an inexpensive programmer with a wide list of supported microcircuits and advanced functions. The programmer has a self-test function. Simple and straightforward software.
The TL866A version supports the fully functional ICSP protocol (via the PIC in-circuit programming connector), unlike the simplified version of the TL866CS. The difference between the models is not only in the presence of the ICSP connector, but also in the software protection for converting a minor version to an older version.
The original program supports English and Chinese, but if you wish, you can find a translated program into Russian on the Internet, on third-party sites. Software works under the operating systems Win 2000/Win XP/WIN 2003/WIN 2008/WIN Vista/Win7/Win8 both 32-bit and 64-bit (software higher than version 5.5)
Difference from MiniPro TL866A programmer - there is no ICSP connector for in-circuit programming.
Specifications:
High speed programming via USB interface (up to 12 Mbps).
Supports a wide range of microcircuits (more than 1300 items): 26 series , 27, 28, 29, 37, 39, 49, 50 parallel ROM, EPROM, EEPROM and FLASH from various manufacturers; series 24, 25, 35, 45, 85, 93, 95 serial EEPROM and FLASH from various manufacturers; (MCS-51); AVR - ATMEGA (ZIF socket uses parallel programming, which allows restoring Fuse bits), ATtiny, AT90XXX; MICROCHIP - PIC10, PIC12, PIC16, PIC18; FPGA (PLD, GAL, PAL). Performs functional testing of SRAM, TTL 54/74 and CMOS 40xx series microcircuits.
The programmer uses ultra-low power consumption microcircuits. For example, the current consumption from the USB port during programming is 20 mA, and in read mode only 7 mA. There is no need for an external power supply for any chips.
Voltages Vpp and Vcc for programmable microcircuits are independent and programmable in the ranges of 3.3-21V and 3.3-6.5V, respectively. Thanks to the multistage LC filter, voltage fluctuations are very small.
High performance independent overcurrent and overvoltage protection for each pin of the ZIF panel. The response time of the programmer protection system is less than 100 μs. This saves the programmer and programmable IC if incorrectly inserted into the panel.
Convenient 40-pin ZIF panel with zero force. All programmable microcircuits, in a DIP package, are installed in the panel starting from pin 1.
One of the smallest programmers. Its overall dimensions: 10 x 6 x 2.5 cm. Weight - 0.3 kg
The programmer has the function of checking and updating the software. Minipro software is updated via the "Tools/Reflash firmware" menu item. The update file is embedded in the software. You can also update manually through the manufacturer's website.
The software has the function of maintaining unique serial numbers, which are necessary for the mass production of electronic equipment. Allows you to automatically write unique identification information to the corresponding microchip of the device being produced, thereby protecting your rights as a developer.
The Minipro program allows you to save firmware files in the following formats: BIN, HEX for microcontrollers and memory chips, JED for FPGAs.
Добрый день. В комплекте только то что на последней фотографии: сам программатор, кабель USB , диск с ПО и кабель для внутрисхемного программирования.
Дополнительно переходников нет в комплекте.
Вы можете приобрести их отдельно:
панели с нулевым усилием
Он работает только со своим ПО. Скачать его можно здесь
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
