Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Soldering iron with ceramic heater with built-in thermocouple, supply voltage 24V, power 50W.
5-pin connector, i.e. soldering iron without motion sensor.
Sting - cone with an end face of 0.4 mm, durable, chrome-plated.
The design of the heater is a ceramic rod wound with a thin nichrome wire, enclosed in a shell - a ceramic tube. A thermocouple is also located there, under the shell. The ceramic sheath protects the nichrome heater from rapid burnout, improves heat transfer, and also insulates the tip from supply voltage breakdown.
It is also possible to use with similar soldering stations from other manufacturers, designed to work with a soldering iron, the heater of which has a built-in thermocouple as a temperature sensor. You only need to replace the connector.
For example, this soldering iron is suitable for Lukey-702 and Lukey-852D+FAN stations, if you change connector .
Parameters heater : a working element has a resistance between the heater terminals of 12-17 Ohm, the resistance between the thermocouple terminals is about 0.5 - 0.8 Ohm.
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown