LED lamp LED 7W surface mounted light, motion sensor

Изображение товара

Product description format_size zoom_out zoom_in

Economical and easy to install motion-sensitive luminaire.
To connect it is enough to apply 220V to the input of the lamp. The input is a red and black wire, and it is desirable to connect the red to the phase, and the black to zero. Yellow wire - output for controlling an external device with a load up to 3A. When the luminaire is triggered, the relay closes the red and yellow wires.
The sensor reacts to movement in its range. The coverage area is a cone with an angle of 100 degrees and a height (length) of up to 8 meters. The sensor's response area is determined by its design. A motion sensor with a Fresnel lens is used to receive the reflected infrared rays, which gives the sensor a viewing angle of 100 degrees. When a signal is received about movement in the area of ​​the sensor, the lighting turns on for 30 ±10 seconds and turns off if there is no movement in the area of ​​the sensor. In the event that movement in the area of ​​the sensor occurs constantly, the lighting will turn off only after the disappearance of movement in the area. The illumination level for turning on the sensor in the area of ​​its action should be ≤50 Lux, that is, only at dusk or at night, or in dark rooms, the sensor will react to movements and turn on the lighting.
The luminaire can be used as an emergency luminaire, as it has a built-in Ni-Cd battery that works when the main supply voltage is lost. Working time of the lamp is about 30 minutes.

Key Features:

• Model: QDDZ-01
• Supply voltage: AC 220 V
• Lamp power: 7 W
• Temperature: 6500-7000 K
• Maximum control power load: 600 W
• Sensor sensing distance: 3-8 m
• Illumination level for sensor operation: ≤50 Lux
• Lighting duration: 30 ±10s
• Built-in battery: yes
• Luminaire body color: white
• Luminaire dimensions (diameter x thickness): 215 x 40 mm
• Wire length: ≈8 cm
• Weight: 450 g