Можливі тимчасові затримки відвантаження товарів транспортними компаніями. Термін відправки після отримання оплати до 4 робочих днів. Вибачте за незручності.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Contains a laser LED with a cylindrical heatsink and passive components that roughly provide the LED operating mode. The laser module KY-008 creates a small spot of light on the opposite object due to the special properties of the laser light. The beam is visible in a smoky or dusty environment. Focuses to a point.
The laser module (red) is used as an emitting component in a photo relay, in which the distance between the light source and the photo detectors is measured in meters. This arrangement of photographic devices is used when counting large objects that have moved between the source and the receiver. In security systems, this is called a light barrier. Other applications include a laser pointer, lighting effect rigs where a light spot is moved with a mirror.
Main characteristics:
Working voltage: 5V
Consumption current: 30mA
Power: 5mW
Wavelength: 650nm (red)
PCB size: 15x20mm
Lens: yes, focus to point
Height: up to 15 mm
Weight: 2.2g
Pin assignment:
Application features:
The KY-008 laser module is afraid of static electricity. Even an impulse excess of the supply or control voltage leads to damage to the LED. During operation, the LED heats up, which slightly reduces the heat sink on the LED. The main parameter of the laser LED power supply is current, not voltage. When heated, the resistance of the LED decreases, the current consumption increases, as a result, heating is accelerated and the developing process leads to negative consequences. In most cases, it is not required to operate the KY-008 laser module at maximum power. The current consumption can be reduced by sequentially installing a 22-100 Ohm resistor in the power supply circuit.
Consumption of maximum current causes rapid overheating, operation at half consumption mode slows down the self-heating process, but it will still occur. The most correct way to ensure reliable operation is to use a stabilizer or current limiter to power the KY-008 laser module.
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
Добрый день. Лазерный диод мощностью 5мВт , фокусируется в точку , как лазерная указка. Питание 5В.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
