ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!
CUSTOMER LOGIN

Forgot your password?
Register
Search:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Materials for production and repairAdhesives, sealants, pastes, scotch tapeUniversal glue
Product code:
032921

Two-component adhesive high-temperature (1730°С) inorganic А522

Two-component inorganic high-temperature adhesive ( 1730°С ) Ausbond A522
Two-component adhesive  high-temperature (1730°С) inorganic А522
Manufacturer: Ausbond (China) Co., Ltd. (AUSBOND)

Deliveries terminated.


from 1 pc : 2 266,00 UAH
from 3 pcs : 2 140,00 UAH ( -5,6%)
from 5 pcs : 2 014,00 UAH ( -11,1%)

Product picture

Product description format_size zoom_out zoom_in

Two-component inorganic high-temperature glue Ausbond A522 after drying, its characteristics are very close to ceramics. Since it does not contain organic compounds, the manufacturer has achieved unique characteristics in terms of heat resistance ( 1730°С ) and chemical resistance (resistance to oils, acids, alkaloids. This glue has excellent adhesion properties. It is used for gluing metal, glass, quartz, ceramics, etc. in any combination.

Specifications:
  • Color - cream
  • Heat resistance - up to 1730°С
  • Hardness - hard, brittle
  • The ratio of the parts "A": "B" - 2: 1
  • Drying time - 30 minutes (minimum)
  • Tensile strength - 63 MPa
  • Shear strength - 62 MPa
  • Bonding strength (steel-steel) - 82 MPa
  • Electrical resistance - 6x10 6 Ohm * cm

How to use:
  1. Clean the bonded surfaces from dirt and rust, dry.
  2. Mix the contents of container A and container B thoroughly.
  3. In a separate container, mix well the contents of container A and container B in a 1: 1 ratio
  4. Spread the resulting mass on the surfaces to be glued.
  5. The glue hardens not earlier than after 30 minutes.
  6. The best adhesion result is achieved after 48 hours of drying at room temperature.
Package Contents:
  • Plastic container with component A (250g) - 1 pc.
  • Plastic container with component B (250g) - 1 pc.

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Вячеслав unknown

Последние просмотренные товары Посмотреть Последние...