Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Digital current clamp for non-contact measurement of alternating current (AC) up to 1000 A. Multimeter functions. Manual selection of measurement limits. USE, incorrectly measures temperature.
Manufacturer:
NOT available.
Expected price:315,00UAH
from 1 pc :
—
315,00
UAH
from 3 pcs :
—
305,50
UAH
( -3,0%)
from 6 pcs :
—
299,20
UAH
( -5,0%)
Prices are indicated at the time of product availability and may change upon receipt
Discounted item.
The reason for the markdown is an incorrect temperature measurement, overestimates the readings. Other measurement functions are OK.
Budget model of current clamp. It allows you to measure the value of the alternating current (AC) by a non-contact method, and also measure direct and alternating voltage, alternating current, resistance, temperature, and allow you to ring a circuit for an open circuit in the multimeter mode using test leads.
The "Data Hold" function makes it possible to carry out non-contact current measurements in hard-to-reach places where it is difficult to visually check the display readings.
Optionally: the ability to connect a megometer adapter module for monitoring wire insulation (500VDC).
Measuring functions
alternating current
DC and AC voltage
resistance
temperature
continuity check (with sound signal)
Data Hold
indication of an incorrectly selected measuring range
low battery indication
Specifications
display: LCD 3 1/2 digits (1999)
sampling rate: 3 times/sec
constant voltage (DC): 200mV/20V/200V/1000V, error ±(0.5%+1)
alternating voltage (AC): 200V/750V, error ±(1%+4)
alternating current (AC): 20A/200A/1000A, error ±(2.5%+5)
resistance: 200Ω/20kΩ/2MΩ, error ±(1%+1)
temperature,°C: from 0°C to 750°C, error ±(1%+3)
continuity: beep at <50 Ohm
maximum measured wire diameter: 28 mm
power supply: 1pc battery 9V 6F22 "Krona"
dimensions: 230 x 90 x 43 mm
weight: 320 grams
Accessories included
set of test leads
K-type thermocouple (0 to 1200°C) with open junction ("ball")
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
