У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
The organosilicon tube is dielectric. unreinforced. High thermal conductivity. Length 1 meter. Internal diameter 10 mm. The TO-220 body fits perfectly into this tube!
It is used to electrically insulate and improve heat transfer between heat-generating elements of electronic circuits (semiconductors, thermal fuses, etc.) and a heat sink.
Plastic, after pressing, it gradually fills all microroughnesses, providing good thermal conductivity.
It is a dielectric. No additional measures are required to electrically isolate the component from the radiator, no need to install a mica gasket, etc. does not require the use of heat-conducting pastes during installation.
inner diameter: 10 mm
outer diameter: 11 mm
wall thickness: 0.5mm
length: 1 meter
Specifications:
color: gray
thermal conductivity coefficient, not less: 1.2 W/(m K)
operating temperature range: -50°C to +260°C
density: 1.8 ±0.2 g/cm³
hardness: (Shore): 70 ±5
tensile strength: 8 ±2 kg * f/cm²
dielectric strength:> 10 kV/mm
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
