Measurement of humidity indoors only with a built-in sensor. The external sensor serves only for temperature measurement.
The device for wall mounting or tabletop installation - there is a hinged leg on the back of the case.
External sensor on an external 2 m cable (removable, on connector, convenient for cable routing).
Cable diameter 2 mm. Outdoor sensor, 4 mm in diameter and 20 mm in length. The sensor is equipped with a metal clip with a self-adhesive layer for fixing on the outer plane of the window. The clip is removable.
Ie the outside of the room requires a hole with a diameter of a little more than 4 mm.
When the external sensor is turned off, the weather station works as a room thermohygrometer.
There is a function for storing the minimum and maximum temperature values in one measurement cycle. These values are indicated by pressing the RESET/MAX/MIN button. Clears the memory with the RESET button.
The switch for units of measurement (degrees Celsius or Fahrenheit) is located on the back of the case, above the battery compartment.
Emoticons appear on the bottom line of the display on the left, showing whether the current temperature and humidity combination is comfortable or not.
-
overall dimensions: 75 x 95 x 15 mm
-
display: LCD 2-line, character height 15 mm
-
memory of maximum and minimum temperature and humidity
-
-
-
-
-
-
-
-
-
![Electronic thermohygrometer HC-520 [weather station]](/files/pic/termometr/035297/035297-1-s.jpg)
![Electronic thermohygrometer HC-520 [weather station]](/files/pic/termometr/035297/035297-1-b.jpg)
![Electronic thermohygrometer HC-520 [weather station]](/files/pic/termometr/035297/035297-2-b.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
