Attention! Sale of discounted goods. The reason for the markdown: in this batch, the diameter of the mounting hole of the cartridge has a positive tolerance instead of the manufacturer's declared -0.02 mm. Accordingly, an "interference" fit on the motor shaft is not always ensured if the shaft also does not have a positive diameter tolerance.
It is recommended to use a chuck in cases where the spindle shaft is made specifically for this instance of the chuck and the fit can be adjusted.
ATTENTION! This is a bargain sale! Quality claims are not accepted, returns are not accepted!
Collet for CNC machines.
For installation on a shaft with a diameter of 8 mm, tolerance -0.02 mm.
Hot landing on the shaft. This fit ensures that the chuck is centered on the shaft.
In addition, the chuck is secured with two diametrically positioned pins.
The chuck is equipped with a 22 mm hexagon socket nut. Nut thread М19х1 mm, outer diameter ∅24 mm.
Please note that usually nuts of modification ER16 with thread size M19x1 are made not with a hexagon for an open-end wrench, but with slots, for a special wrench, and the outer diameter of such a slotted nut is ∅22 mm.
Features :
-
diameter of shaft fit: 8 (-0.02) mm
-
fastening type: pressure screws
-
collet type: ER16
-
outer diameter of the cartridge body - 20 mm
-
thread: М19х1
-
length (without clamping nut) - 38 mm
-
assembled length (with nut and collet): 47 mm
-
accuracy: 0.01mm
-
material: steel 40Cr (analogue - domestic steel 40X)
-
hardness: 48-52 HR
-
weight: 100 g (complete with nut and collet)
Completeness :
-
cartridge - 1 piece
-
clamping nut - 1 pc.
Attention! The chuck is not supplied with ER16 collets, they must be purchased separately (the photo shows the collet for an example).
The appearance of the cartridge (design of the outer surface of the case) may differ in different batches of products. This does not affect the functionality of the cartridge.