ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

УВАГА! Шановні клієнти магазину в м.Дніпро!

З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.




Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Development toolsModulesPower Converter Modules
Код товара:
037254

DC/DC Converter Module MP2315 STEP-Down 2A (3Amax)

Step-down DC/DC converter.
Vin 4.5-24V, Iout max 3A
DC/DC Converter Module MP2315 STEP-Down 2A (3Amax)
In stock
30,00 UAH × = 30,00 UAH
from 1 pc : 30,00 UAH
from 10 pcs : 27,00 UAH ( -10,0%)
from 50 pcs : 24,00 UAH ( -20,0%)

Current balances:

Магазин-Днепр
900 pcs
For Online Orders
900 pcs

Изображение товара

Product description format_size zoom_out zoom_in

Miniature DC/DC converter based on MP2315 microcircuit. Well suited for replacing common L78xx regulators in TO220 package. The pitch of the holes on the module completely coincides with the pitch of the L78xx series linear regulators, which makes them easy to replace.
The pulse circuit has a higher efficiency, which means less heating in comparison with linear stabilizers.

Key Features:

  • Input voltage 4.5-24V
  • Output voltage: 1.25-20V, 1.8V, 2.5V, 3.3V, 5V, 9V, 12V.
  • Maximum output current: up to 3A,
  • PCB hole pitch: 2.54mm
  • Module dimensions: 20 * 11 * 5mm

Features:

  • The output voltage is either interlinear or fixed at 1.8V, 2.5V, 3.3V, 5V, 9V or 12V. To use fixed voltages, cut the ADJ track and solder the jumper against the desired voltage.
  • If the load is more than 1.5-2A, it is recommended to install a heatsink on the board.
  • Output “EN” disable the stabilizer. Logic zero (GND) - the stabilizer is off, thrown in the air or pulled up to 5 volts - the stabilizer is working (the module has a pull-up of the EN pin to the power pin through a 200K resistor)

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: Посмотреть больше…