Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Miniature DC/DC converter based on MP2314 microcircuit. Well suited for replacing common L78xx regulators in TO220 package. The pitch of the holes on the module completely coincides with the pitch of the L78xx series linear regulators, which makes them easy to replace.
The pulse circuit has a higher efficiency, which means less heating in comparison with linear stabilizers.
The output voltage is either interlinear or fixed at 1.8V, 2.5V, 3.3V, 5V, 9V or 12V. To use fixed voltages, cut the ADJ track and solder the jumper against the desired voltage.
If the load is more than 1.5-2A, it is recommended to install a heatsink on the board.
Output “EN” disable the stabilizer. Logic zero (GND) - the stabilizer is off, thrown in the air or pulled up to 5 volts - the stabilizer is working (the module has a pull-up of the EN pin to the power pin through a 200K resistor)
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
