ARDUINO module JoyStick Shield V1.A Funduino Купить в интернет-магазине

ARDUINO module JoyStick Shield V1.A Funduino

Joystick module with buttons for Arduino

NOT available.

Expected price: 84,00 UAH

from 1 pc :	—	84,00	UAH
from 3 pcs :	—	81,48	UAH	( -3,0%)
from 10 pcs :	—	75,60	UAH	( -10,0%)

Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Description
Images
Feedback-Questions

Изображение товара

Product description format_size zoom_out zoom_in

Funduino JoyStick Shield V1.A is a functional input device for Arduino boards, the arrangement of buttons and joystick is similar to the controllers of game consoles. Suitable for UNO and Mega boards.

This board contains:

2-axis joystick with button
4 large buttons
2 small buttons
Bluetooth/Serial interface (UART)
I2C interface
nRF24L01 interface
Nokia 5110 LCD interface
Arduino interface
Power switch between 3.3 and 5V

Button connection diagram:

Arduino	A0	A1	D2	D3	D4	D5	D6	D7	D8
Shield	X axis	Y-axis	A	B	C	D	E	F	K

I2C bus: SDA/SCL lines on A4/A5

nRF24L01 and Nokia 5110 LCD interface:

GND – Ground.
VCC – 3.3V
CE – D9
CSN – D10
SCK – D13
MOSI – D11
MISO – D12
IRQ – No Connection

Scheme (clickable):

Sample code for Arduino IDE:

/* Funduino Joystick Shield Example

This program simply captures all of the inputs of the Funduino Joystick Shield buttons and
joystick every second and displays them in the Serial Monitor Window.  
The Arduino pins below are defined by the shield and cannot be changed.
*/
int const UP_BTN = 2;
int const DOWN_BTN = 4;
int const LEFT_BTN = 5;
int const RIGHT_BTN = 3;
int const E_BTN = 6;
int const F_BTN = 7;
int const JOYSTICK_BTN = 8;
int const JOYSTICK_AXIS_X = A0;
int const JOYSTICK_AXIS_Y = A1;
int buttons[] = {UP_BTN, DOWN_BTN, LEFT_BTN, RIGHT_BTN, E_BTN, F_BTN, JOYSTICK_BTN};
//===============================================================================
//  Initialization
//===============================================================================
void setup() {
  //Set all button pins as inputs with internal pullup resistors enabled.
  for (int i; i < 7; i++)  pinMode(buttons[i], INPUT_PULLUP);
  Serial.begin(9600);
}
//===============================================================================
//  Main
//===============================================================================
void loop() {
  // Check each button input and print the status to the Serial Monitor Window
  Serial.print("UP = "),Serial.print(digitalRead(UP_BTN)),Serial.print("t");
  Serial.print("DOWN = "),Serial.print(digitalRead(DOWN_BTN)),Serial.print("t");
  Serial.print("LEFT = "),Serial.print(digitalRead(LEFT_BTN)),Serial.print("t");
  Serial.print("RIGHT = "),Serial.print(digitalRead(RIGHT_BTN)),Serial.print("t");
  Serial.print("E = "),Serial.print(digitalRead(E_BTN)),Serial.print("t");
  Serial.print("F = "),Serial.print(digitalRead(F_BTN)),Serial.print("n");
  Serial.print("JOYSTICK BTN = "),Serial.print(digitalRead(JOYSTICK_BTN)),Serial.print("t");
  // Map the X/Y joystick to basic -1/0/1 to indicate basic direction of the joystick
  Serial.print("X DIR = "),Serial.print(map(analogRead(JOYSTICK_AXIS_X), 0, 1023, -1, 1));Serial.print("t");
  Serial.print("Y DIR = "),Serial.print(map(analogRead(JOYSTICK_AXIS_Y), 0, 1023, -1, 1));Serial.print("t");  
  // Print the full X/Y joystick values (0-1023)
  Serial.print("X = "),Serial.print(analogRead(JOYSTICK_AXIS_X));Serial.print("t");
  Serial.print("Y = "),Serial.print(analogRead(JOYSTICK_AXIS_Y));Serial.println("n");  
  delay(1000);
  
 }

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Новинки All New Items...

Recommended All…