ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

УВАГА! Шановні клієнти магазину в м.Дніпро!

З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.




Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Materials for production and repairAdhesives, sealants, pastes, scotch tapeUniversal glue
Код товара:
038529

Anaerobic structural adhesive Kafuter K-0306 50ml for plastic

One-component, medium viscosity adhesive for hard plastics. Bottle of 50 ml.
 Anaerobic structural adhesive  Kafuter K-0306 50ml for plastic
Expected price: 241,90 UAH
from 1 pc : 241,90 UAH
from 3 pcs : 234,70 UAH ( -3,0%)
from 10 pcs : 227,50 UAH ( -6,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

One-component metal acrylate-based structural adhesive.
The main purpose is for gluing rigid plastics such as ABS, PC, PVC, PMMA, fiberglass and other similar non-metallic materials. Also has good adhesion to metals, glass, crystal, quartz, jewelry, etc.
Anaerobic, shockproof.
Gel-like, easy to apply.
The initial curing time of the adhesive at a temperature of 25°C is no more than 10 minutes. The curing speed can be increased with the K-7246 activator, the curing time will be no more than 5 minutes. Full curing occurs within 24 hours, while gaining nominal strength.
The thickness of the glue line must not exceed 0.25 mm.

Features:

  • name: K-0306 Anaerobic structural adhesive
  • main ingredient: methacrylate
  • appearance: yellowish viscous liquid
  • density: 1.06 g/cm³
  • viscosity: 1000 ~ 3000 mPas
  • flash point:> 108°C
  • shear strength: ≥12mpa
  • working temperature: -54 ~ 120°C
  • curing time (at 25°C): ≤10 minutes (initial cure), 24 hours (full cure)
  • joint filling, maximum: 0.25mm
Recommended use:
1) Clean and degrease the surfaces to be glued.
2) Apply glue to the surface and press down. When used without activator K-7246, the initial curing time should be 10 minutes.
3) When used with K-7246 activator, the adhesive can be applied to one of the bonding surfaces and the activator to the other, then the compound can be cured in 1 ~ 5 minutes. If the thickness of the glue line is increased (up to 0.25 mm) or a higher curing speed is required, the K-7246 activator should be applied to both surfaces. The parts must be reassembled immediately.

Remember that the full strength of the adhesive bond occurs after 24 hours!

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: Посмотреть больше…