Fast curing, requires less than 15 minutes to set (full strength is gained within 24 hours at a temperature of 25°C).
High retention rate, recommended for threads from M6 to M36.
Protects threads well against corrosion.
Recommended for auto and motor vehicles.
Compared withK-0262it has higher activity, high temperature resistance and better resistance to oil contamination.
Characteristics:
-
color: red
-
maximum thread size: up to M36
-
fixation degree: high
-
breaking moment of M10 bolts: ≥20 Nm
-
average moment of disassembly of the connection: ≥20 Nm
-
operating temperature range: -54°C+180 °
-
maximum joint filling thickness: 0.13 mm
-
packing volume: 50 ml
Testing Item: |
K-0263 Thread Locker Adhesive |
Main ingredient: |
epoxy resin methacrylic |
Appearance: |
red liquid |
specific gravity: |
1.05g/m3 |
Viscosity: |
thixotropic, in 300~700mPas |
Flash Point: |
>108°c |
Prevail Torque: |
≥20 N.m |
Break torque: |
≥20 N.m |
Working temperature: |
-54~+180°C |
Room Cure time(at 25°c): |
15 minutes(initial cure time)
24 hours (full cure time)
|
Max filling: |
0.13mm |
Reference Information:
Anaerobic sealants and adhesives are a special class of acrylic adhesives, which are liquid compositions of various viscosities that can be stored for a long time (≥1 year) in a thin-walled oxygen-permeable polyethylene container without changing their properties and cured at a temperature of 15-25°C in narrow metal gaps (in pores, threaded, flange and cylindrical joints) with the formation of a durable polymer layer.
One-part anaerobic adhesives and sealants for metal joints fix, secure and seal quickly, reliably and economically all types of threaded, cylindrical and pipe connections.
The locking adhesive completely fills the thread gap and thus creates maximum contact with the surface.
Anaerobic adhesive is ideal for securing, securing and sealing screws Bearings, couplings, bolts and other planer parts in running and press fits will be securely fastened.
The hardening process begins only when there is contact with the metal at the place of fixation and there is no access to air.
Anaerobic glue remains liquid as long as oxygen is available.
Disadvantages of anaerobic glue-sealant: in the case of using a strong fixing composition during dismantling, it is necessary to use special tools or heat.