The scope of this precision electric screwdriver with a built-in lithium-ion battery: self-assembly and disassembly of a mobile phone, digital tablet, glasses, laptop and other electronic devices, i.e. for small and medium equipment. It is not suitable for large equipment where very high torque is required in the initial state and in the final state of the screw tightening.
The screwdriver can be operated both in electric mode and in manual mode. It is also possible to use both modes at the same time.
The battery is charged via a USB-microUSB cable connected to the connector at the end of the screwdriver. It is possible to charge the battery from a computer, laptop and other devices with an output with parameters 5V 0.25A
Characteristics:
-
Rotational speed - 160 rpm
-
Maximum torque - 0.16 Nm (electric mode), 0.3 Nm (manual mode)
-
Bit material - S2 steel
-
Screwdriver body material - aluminum
-
Battery - Li-ion, type 14500, 3.7 V, 800mA
-
Charging time - 60 min
-
Working time - 2 hours
-
Screwdriver dimensions - Ø18 mm, length 165 mm
-
Screwdriver weight - 75 g
Set:
-
Plastic box - 1 pc.
-
Magnetizer-demagnetizer - 1 piece
-
Charger cable - 1 pc
-
Screwdriver with battery - 1 pc
-
Bits 4 mm - 21 pcs:
- asterisk (security torx) - T6, T8, T9
- asterisk (torx) - T5
- cross (Phillips) - PH000, PH0, PH2
- hexagon (hexagon) - Н1,5, Н2, Н2,5, Н3
- five-pointed star (pentalobe) - P1, P1.2, P1.5
- flat (slot drive) - SL1, SL2, SL3
- triangle (tri-angle) - Δ3
- square (Robertson) - S0
- Three beams (Tri Wing) - Y2,5
- Plug (Double Pin) - U3
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
