The sealant is intended for the assembly of sealed joints in exhaust systems, the elimination of small holes and cracks in mufflers, exhaust pipes, catalytic converters, resonators, etc. Suitable for exhaust pipes with and without a catalyst.
It can also be used in other branches of technology, where high-temperature components are required to be sealed.
Properties:
• provides reliable sealing of joints
• retains its properties at temperatures up to 1100°С
• safe for catalysts
• can be used in everyday life as a high-temperature glue
Assembling new connections:
1. Apply 6mm thick compound to the inner and outer ends of the muffler or exhaust pipe.
2. Carry out a normal assembly.
3. Seal all joints with cement.
Repairs:
1. Clean surfaces from oil, scale, grease and rust.
2. Apply the required amount of cement and seal holes and cracks. When sealing extensive damage, it is recommended to reinforce the outside of the repaired area with a metal or fiberglass mesh.
The cement setting takes place after 20 minutes of idling, complete hardening after 2-4 hours. Without heating, the cement polymerizes within 12 hours.
Composition: sodium silicate, water, aluminum silicate.
ATTENTION!Irritating! Avoid contact with eyes and prolonged skin exposure. In case of contact with eyes or skin, rinse thoroughly with water. If swallowed, consult a doctor. PROTECT FROM CHILDREN!
Файл с описанием
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
