Modern formula. An easy-to-use tool that repairs most punctures within a minute.
Designed for the repair of tube and tubeless tires mounted on cast and stamped rims. Suitable for passenger car and light truck tires over radius 14. For wheels less than 14th radius, one cylinder can be used to repair two wheels.
Principle of operation: when interacting with air, the composition polymerizes, forming a strong plug. Reliably seals the place of air leakage with a punctured object diameter up to 4.5 mm.
Properties:
-
unlike many other formulations, it does not affect wheel balancing
-
remains active in the wheel for a long time and prevents further air leaks
-
does not lead to the formation of rust on the inner surface of the discs
-
does not freeze in winter
Application:
Examine the punctured wheel carefully and try to remove the object that pierced it.
If you inflated the wheel before starting the repair, lower it almost until the rim touches the ground.
Shake the bottle, turn the wheel with the nipple down. Screw the fitting of the plastic cylinder tube onto the nipple tightly.
Hold the bottle with the valve facing up.
Open the valve safety cap. Press the valve and hold until the foam stops flowing into the wheel. Use the entire can.
The wheel should pump and the rim should be off the ground.
After that, you should drive 1-2 km to evenly distribute the composition over the wheel and find a puncture with it, and then pump up the wheel to working pressure
How it works: When released with the air through the puncture, the agent forms a strong vulcanized plug that stops the leak. The modern formula, unlike other formulations, does not affect the balancing of the wheels, it remains in the wheel in an active state for a long time and prevents the occurrence of air leaks in the future.
Attention!
Flammable. Avoid mechanical damage to the high-pressure cylinder