The power regulator is designed to connect an active load (electric heating, lighting devices, soldering irons, incandescent lamps) to an alternating current 220V. It is also suitable for regulating some AC induction motors, fans, grinders, electric drills, etc.
Not intended for reactive load regulation: energy saving lamps, consumer electronics, LED lamps and flashlights, transformers, etc.
Voltage regulation is carried out from about 50 V. The power regulator is built on the BTA16-800B triac, which is designed for maximum current and voltage values of 16A and 800V, respectively. For convenience, the regulator is connected on wires with a connector. The length of the wires is about 18 cm.
When using this dimmer above 1200 W, it is recommended to provide additional ventilation for the radiator.
Connection according to the markings on the board.
Main characteristics:
-
Working voltage: 220V AC
-
Control range: 100% to 15%
-
Maximum load power (active): 2000 W
-
Applicable triac: BTA16-800B (or equivalent)
-
Efficiency:> 90%
-
Dimensions: 47 x 35 x 27mm
-
Weight: 40g
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
