Structural fast drying acrylic adhesive, two component. Viscous, can be used on vertical surfaces.
For bonding metal, ceramics, wood, glass, crystal, composite materials.
Resistant to air, water, oils.
The connection has sufficient elasticity to withstand shock loads, vibration, thermal expansion of the connected parts.
Can be used to assemble plastic panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in automobiles and agricultural machines.
Allows bonding of poorly degreased surfaces.
Wide operating temperature range. from -60°C to +200°C.
Applicable for bonding with a maximum mounting gap of 0.5 mm, with an activator can fill gaps up to 1 mm. Not recommended for bonding greasy plastics, i.e. polyolefins (PP, PE, Teflon, silicone rubber, etc.)
Store in a cool dry place at 8°C - 30°C.
Characteristics:
-
component A color: light green
-
component B color: light pink
-
viscosity (cps, 25°C): A: 4000±500, B: 4000±500
-
setting time: 5-10 minutes (at a temperature of at least 25°C)
-
functional strength gain time: 10-30 minutes.
-
full strength time : 24 hours
-
tensile strength (steel × steel): >18 mpa
-
impact resistance (kJ/m3): >10
-
Gap to be filled: 0.05 – 0.5 mm.
-
operating temperature range: -60°С to +200°С
-
packaging: tubes 2 pcs in a blister
-
weight: 70 grams
Suggestions for use:
To start polymerization, it is necessary to mix components A and B of the adhesive in a ratio of 1:1. Please note that the mixture must be used within 1-2 minutes, before setting begins.
Apply the mixture to the surfaces to be bonded, then press the surfaces together.
Surfaces must be pre-cleaned and degreased.