Low voltage soldering iron with ceramic PTC heater.
To connect to a car battery, the power cable is equipped with alligator clips.
Power cable in heat-resistant, elastic silicone insulation.
The main advantage of the soldering iron is the compatibility of the design of the heating element and tip (tip) with the design of soldering irons used in the most popular soldering stations. These are 900M series tips, or as they are also called differently - HAKKO type tips.
It is the prevalence of these soldering tips that is an undeniable advantage. You can always purchase a tip of the required configuration, and for those who have a soldering station with an already formed set of tips, this soldering iron will be a good addition to the station when soldering work away from the workplace.
Just like in soldering stations, the procedure for changing the soldering tip takes just a few seconds.
Tips 900M - chrome-plated, durable, with factory tinning of the tip. Chrome-plated tips do not require sharpening, and if the operating rules are followed, they have a long service life.
The ergonomic handle makes work comfortable.
Initially, in the factory configuration, the soldering iron is equipped with a conical tip with a tip with a diameter of 0.8 mm (i.e., a 0.8 mm cone).
-
supply voltage: 12V
-
power: 40 W
-
power regulator: no
-
quick change blades: yes
-
tip type: 900M
-
cable length: 1.1 m
Complete parts:
Attention!
Due to the high heating dynamics, it is not recommended to operate the soldering iron at the maximum heater temperature, especially with a low-mass (thin) tip installed. This will avoid overheating of the soldering iron, thereby ensuring high-quality soldering and a long service life of the tip and heater. Since there is no power regulator in this soldering iron, if it overheats you need to either reduce the supply voltage or turn off the soldering iron.
The soldering iron tip and heating element are consumable items and are not covered by the warranty.
All soldering irons undergo 100% pre-sale testing.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
