У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Two in one - cable tester for computer networks with RJ-45 connectors, telephone networks with RJ-11 connectors (search for breaks, shorts, crosses), as well as a locator for finding a wire or cable in a bundle without damaging the insulation.
detection of wires of cable lines up to 2 km long (locator)
diagnostics of the state of a network cable (twisted pair, telephone line)
detection of breaks , short circuits and crossing of wires in cable lines
light indication (LED) for cable crossing and sound for the locator (built-in speaker and headphone jack)
Features:
telephone line polarity indication: yes
overvoltage protection: AC 14 V or DC 10 V
low battery indication power supply: 6.0 V
power supply: 9V battery of KRO type ON (6F22), 2 pcs.
Scope of delivery:
tester receiver: 1 pc
tester transmitter: 1 piece
RJ-11/RJ-11 adapter cable: 1 piece
RJ-45/RJ-45 adapter cable: 1 piece
If it is necessary to define an RJ-45 cable in a bundle, use the SCAN function. The transmitter is connected on one side of the cable, the other side is dialed with the receiver. The target cable is identified by the presence of the strongest audio signal. You can dial either a connected or unconnected cable.
Searching for a telephone cable in a bundle
The algorithm is similar to searching for a network cable. For ease of connection, the kit includes an RJ-11 patch cord for connecting to a telephone socket or an RJ-11 adapter - "crocodiles" for connecting directly to the pins or wire cores.
Attention!
When testing a telephone cable, you should be careful - unlike an Ethernet network, where the maximum voltage cannot be more than 5V, the voltage in the telephone network at rest is 50V, and during a call it can reach 110V. If we look at the circuitry of the receiver, we can find that there is no protection against high voltage on the board, and the logic chips CD4017BP and CD4066BM located next to the cable connectors are designed for a maximum voltage of 18V, which is safe when connecting an Ethernet cable, but not a telephone one. .
Accordingly, in case of such damage, the breakdown is not considered a warranty.
