Можливі тимчасові затримки відвантаження товарів транспортними компаніями. Термін відправки після отримання оплати до 4 робочих днів. Вибачте за незручності.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Powerful buck DC/DC converter with adjustable output voltage stabilized and adjustable maximum current. Made using synchronous rectification technology on the LM25116 microcircuit and two IRFB3607 field-effect transistors.
Adjustment of current and voltage is carried out using trimming resistors installed on the board. The output current can reach 20 A. The module is equipped with overcurrent protection, overheating protection, short circuit protection.
Great for powering LEDs, building chargers, just a regulated converter, or a module for a laboratory power supply.
Key Features:
Maximum output power: 300W
Ripple: ±50mV
Voltage regulation: 0.5%
Load regulation: 2.5%
Input voltage: 6 - 40 V
Output voltage: 1.2 - 36 V
Maximum output current: 20 A
Efficiency: ≤ 95%
Overload protection: yes
Overheating protection: yes
Short circuit protection: yes
Working temperature range: -40 ... +85°C
Module dimensions: 60 x 53 x 27 mm
Pinout of terminal blocks:
IN +: "plus" input supply voltage
IN-: "minus" input supply voltage
OUT +: "plus" output voltage
OUT -: "minus" output voltage
Adjustment:
CV: output voltage adjustment
CC: output current adjustment
When working with this module, it is worth considering some of its features:
If the radiator heats up more than 60 degrees, you need to install active cooling (fan), otherwise it may fail
The input/output voltage difference must be at least 2V. The output voltage cannot be more than the input voltage.
When using a converter, the "minus" of the input and output must be galvanically isolated (not connected), otherwise the current sense resistor will be "short-circuited" and the maximum output current limitation will not work. This can lead to module overload and failure.
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
Это модуль понижающего типа. Чтобы он выдал 12В 5А, нужно подать не меньше 13,8 - 14 вольт.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
