Dielectric adhesive for mounting electronic components on radiators, has high thermal conductivity and elasticity.
The glue is based on RTV silicone rubber.
One-component, cures on contact with moisture in the ambient air.
High viscosity, does not run off on vertical surfaces.
It has good adhesion to metals and non-metallic surfaces.
Waterproof.
Chemically neutral, does not corrode mating surfaces.
Resistant to ultraviolet radiation, retains elasticity over a wide temperature range.
It is used as an insulating, heat-conducting and electrical insulating material.
Great for encapsulating LED modules.
Features :
-
tensile strength (MPa): ≥2.5
-
Shear strength (MPa): ≥1.5
-
thermal conductivity: 1.6 W/(m * K)
-
hardness (Shore A): 50 ~ 65
-
curing start time (at 25°C): ≤10 min
-
working temperature: - 60 ~ 280°C
-
dielectric strength: ≥18 kV/mm
-
resistance 1 * 10¹³
-
color: white
-
net weight: 80 grams
-
packing: tube
Cures at a speed of 2-4 mm deep in 24 hours at room temperature and 55% relative humidity (further curing continues).
Two-component compounds are recommended for layers over 6 mm thick.