У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Two-component epoxy adhesive in a "double syringe" package for repair and bonding in any combination of ferrous and non-ferrous metals and their alloys.
Forms a reliable and durable waterproof connection.
Resistant to solvents.
The steel gray color is due to the finely dispersed metallic filler.
After complete curing, it can be easily processed with mechanical tools.
Characteristics
composition - epoxy resins, mercaptan, DPM-30 curing accelerator, bis (dimethylamino) methyl phenol, functional additives that make up the company's know-how
color - gray, steel
application temperature - from+15°С to+35°С
heat resistance - from -55°С to+150°С
bond strength - 250 kg/cm²
setting time - 5 min
hardening time - 30 min
full polymerization time - 12-16 hours
Application area
repair and bonding in any combination of cast iron, steel, aluminum alloys and non-ferrous metals
sealing of welded seams
Features and Benefits
after polymerization it is harmless, resistant to oil products, water, solvents
has good performance characteristics, does not shrink
withstands constant and variable loads, vibrations
packaging "double syringe" allows you to achieve accurate dosage of components and stable strength of the glue line
Application
Clean the surfaces to be connected from dirt.
Sandpaper, degrease and dry.
Remove the locking cap from the dispenser handle.
Break off the tips of the syringe nozzles, keeping the dispenser in an upright position, remove the air by pressing the plunger.
Squeeze out (the dispenser automatically dispenses the correct ratio of components) and mix thoroughly on a clean, non-porous surface for 1 minute.
Apply the prepared mixture in a thin even layer on both bonded surfaces. The time from the moment of preparation of the mixture to the final fixation of the treated surfaces should not exceed 1-2 minutes.
Join the bonded surfaces of the parts and fix them in a compressed state for 5 minutes.
Remove excess compound immediately with white spirit or similar solvent.
Polymerization of the adhesive occurs within 30 minutes after the start of gluing the parts.
At a lower temperature, the curing time increases, at a higher temperature, it decreases.
After finishing work, slightly pull the plunger back, clean and close the syringe nozzles with the cap.
Attention!DD6573 - Flammable. Use with good ventilation. Avoid contact with skin and eyes! In case of contact with skin, wash with soap and water. In case of contact with eyes, rinse with copious amounts of water and seek medical attention. If swallowed, seek medical advice immediately. Dispose of as household waste after use or expiration date.
PROTECT FROM CHILDREN!
Storage
Store at temperatures from+15°C to+35°C in a cool dry place in an upright position, with spouts up.
It is advisable to use opened packaging within 1 year.
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
