CXG soldering iron heater A1326 [60W, 220V] ceramic

Зображення товару

Product description format_size zoom_out zoom_in

For CXG936d soldering irons with temperature controller.
Ceramic heating element with built-in thermistor as a temperature sensor.
It is PTC ceramics, not a nichrome spiral, in a ceramic shell!
Rated supply voltage - 220V.
Rated power - 60 W.
The heater is designed to work only in soldering irons with a temperature controller, in pulse mode!
Warming up is very fast, and connecting power in constant mode will cause the heater to quickly overheat and fail.

With properly organized PID temperature control of the soldering iron, such a heater tolerates exceeding the rated power well, but it is necessary to monitor the quality of the soldering tips used. Cheap tips with reduced thermal conductivity and violation of installation dimensions significantly reduce the life of the heating element.

The fundamental difference between this heating element is the resistive temperature sensor. It cannot be installed instead of a similar heater with a nichrome spiral and a thermocouple!
To avoid confusion, pay attention to the external distinctive features of the original heater:

• There is a longitudinal groove along the entire heater, formed during production;
• the outer end of the heater is designed in the form of a flat disk, with a diameter slightly smaller than the heater itself, as if with a step (on nichrome heaters, the end cap is in the form of a fungus or is simply covered with ceramic paste, sometimes it falls out).

A working element has a resistance between the heater terminals of about 200-220 Ohms, and a resistance between the temperature sensor terminals of about 50-60 Ohms.

Characteristics:

• supply voltage: 220 V
• rated power: 60 W
• diameter: 3.8mm
• rod length: 60mm
• installation length (with leads): 70 mm

Packaging: plastic cone (protects from damage during transportation).

All heating elements are tested before being put on sale - visual inspection, checking the resistance of the heater and temperature sensor.
Warranty does not apply to heating elements.