Soldering iron with PTC-type ceramic heater. Such a heater, in comparison with nichrome, with an equal rated power, has better heating dynamics, the heater resource is longer.
Sting - a cone with an end face of 0.8 mm, durable, chrome-plated.
Connector with 5 pins, i.e. soldering iron without motion sensor.
It is supposed to be used with soldering stations of various manufacturers, designed for operation of a soldering iron with a HAKKO 1321 heater, i.e. with a thermistor as a temperature sensor. It is only necessary to replace the connector for a specific station model.
For example, this soldering iron will fit the Lukey-868 and Lukey-852D+stations if you change the connector.
The temperature sensor is a resistive type, integrated into the heating element.
Rated supply voltage 24V, power 50-75 W.
Soldering iron cable 1 meter long.
Heater parameters: in a working element, the resistance between the heater terminals is about 3-4 Ohms, the resistance between the terminals of the temperature sensor is about 50-60 Ohms.
spare heater
All soldering irons are 100% pre-tested. The tip and heating element of the soldering iron are consumable items and are not covered by the warranty.
![Soldering iron spare analogue HAKKO-907 [24V, 50W, PTC heater]](/files/pic/tools/lukey/037469/037469-1.jpg)
![Soldering iron spare analogue HAKKO-907 [24V, 50W, PTC heater]](/files/pic/tools/lukey/037469/037469-1-b.jpg)
![Soldering iron spare analogue HAKKO-907 [24V, 50W, PTC heater]](/files/pic/tools/lukey/037469/037469-2-b.jpg)
![Soldering iron spare analogue HAKKO-907 [24V, 50W, PTC heater]](/files/pic/tools/lukey/037469/037469-3-b.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
