ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Radio constructors (full set of parts)
Код товара:
045719

Radio constructor Amplifier 2x 30W on TDA7377 K161.1

Radio constructor for self-assembly of the Low Frequency Amplifier board
Radio constructor Amplifier 2x 30W on TDA7377 K161.1
Manufacturer: RADIO-KIT
In stock
123,90 UAH × = 123,90 UAH
from 1 pc : 123,90 UAH

Current balances:

Магазин-Днепр
8 pcs
For Online Orders
8 pcs

Technical documentation

K-161_1K-161_1 (297Kb)

Изображение товара

Product description format_size zoom_out zoom_in

  The ULF is made on the TDA7377 integrated circuit. This chip is a class AB amplifier. Based on this chip, you can assemble an amplifier using a minimum of elements. It can be recommended to novice radio amateurs for self-assembly of a home or car speaker system.
 

Specifications:

  • Supply voltage, V................……….10-18
  • Band of reproducible frequencies, Hz……..20-20000
  • Input impedance, kOhm………………..15
  • Harmonic coefficient, at Upit=14.4V, Р=0.1-10W, % ....………..0.03
  • Gain, dB......................……...26
  • Rated output power, at U=14.4B і R=4Ohm, W......................…………….2x20
  • Maximum output power, at U = 18V and R = 4Ω, W .............………….2x30

Circuit diagram

Element layout

Building and configuring the module

  The assembly of the amplifier is carried out according to the instructions that come with the designer. The seats on the board and the ratings of the parts are indicated in the instructions.
WARNING!
  The STB switch puts the IC into standby mode with a current consumption of not more than 60 μA. To transfer the microcircuit to the operating mode, it is necessary to close the STB contact with the VCC contact.
  The MUT switch acts as a mute switch. To turn on the sound, you need to close the MUT contact with the VCC contact. It is recommended to install the IC on a heat sink with a total area of ​​at least 400 sq. see

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

  • ШЕФ A year ago share

    Доброго здоров'я, підкажіть будь ласка, які розміри самої плати у конструкторі, і на вашу суб'єктивну думку - висоту зібраної плати. 

    Is the review helpful?
    • Денис (Менеджер интернет-магазина) A year ago share

      На сайті виробника вказані такі габарити зібраного модуля: 37х30х27mm

      Is the review helpful?
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: Посмотреть больше…